
|
American Engineering Fabrics, Inc.,
Inc. offers AASHTO-M-288 geotechnical fabric for soil, embankment and roadway
stabilization and separation. This geotechnical fabric is woven from UV non-degradable
polypropylene tapes and has been NTPEP tested and approved.
AEF geotechnical fabric increases the life expectancy of permanent and
temporary roads, trails, paths, and driveways.
- Soil embankment and roadway stabilization
- Use of Geotechnical Fabric in Internal Reinforcement of Retaining Walls

- Steep Slope Reinforcement with Woven Geotextiles

- Geotechnical Fabric used for Subgrade Stabilization

- Woven Geotextiles used in Reinforcing Embankments Over Soft Soils

- Woven Geoxtextiles are from high UV, non-biodegradable polypropylene tapes.
- Resistant to sun, soil chemicals, mildew and insects.
- Speeds construction, reducing overall costs.
- Increases life of paved and unpaved areas.
- Suitable for use with riprap.
|
Style |
Test
Method |
307 |
AEF
200W |
AEF
300W |
883 |
884 |
Widths
(ft) |
12.5 |
15.0 |
17.5 |
12.5 |
15.0 |
17.5 |
12.5 |
15.0 |
17.5 |
12.5 |
15.0 |
17.5 |
12.5 |
Length
(yd) |
100 |
100 |
100 |
100 |
100 |
Gross
Weight (lb) |
94 |
114 |
132 |
138 |
165 |
191 |
167 |
202 |
240 |
188 |
225 |
263 |
262 |
Area
(yd2) |
417 |
500 |
583 |
417 |
500 |
583 |
417 |
500 |
583 |
417 |
500 |
583 |
417 |
Composition |
Polypropylene |
Polypropylene |
Polypropylene |
Polypropylene |
Polypropylene |
Grab
Tensile (lb)
Warp x Fill |
ASTM
D-4632 |
175
x 100 |
200
x 200 |
250
x 250 |
315
x 315 |
435
x 435 |
Elongation
at Break (%)
Warp x Fill |
ASTM
D-4632 |
20
x 15 |
15
x 15 |
15
x 15 |
15
x 15 |
20
x 20 |
Trap
Tear (lb)
Warp x Fill |
ASTM
D-4533 |
50
x 50 |
70
x 75 |
90
x 90 |
120
x 120 |
135
x 135 |
Mullen
Burst (psi) |
ASTM
D-3786 |
320 |
400 |
550 |
600 |
850 |
Puncture
Strength (lb) |
ASTM
D-4833 |
60 |
100 |
110 |
125 |
200 |
A.O.S.
(Sieve) |
ASTM
D-4751 |
40 |
40 |
40 |
40 |
N/A |
Permittivity
(sec-1) |
ASTM
D-4491 |
0.050 |
0.070 |
0.050 |
0.050 |
N/A |
Coefficient
of Permeability (cm/sec) |
ASTM
D-4491 |
0.002 |
0.004 |
0.003 |
0.003 |
N/A |
Water
Flow Rate (gpm/ft2) |
ASTM
D-4491 |
4.5 |
6.0 |
4.0 |
4.0 |
N/A |
UV
Resistance (%) |
ASTM
D-4355 |
70 |
70 |
70 |
70 |
70 |
70%
(hr) |
ASTM
D-4632 |
2500 |
150 |
150 |
150 |
1200 |
AASHTO-M-288-NTPEP
Tested |
- |
Class
III |
Class
II |
Class
I |
- |
Color |
Black |
Grey |
Grey |
Grey |
White |
|
Style |
Test
Method |
AEF
600W |
AEF
650W |
Widths
(ft) |
12.5 |
12.5 |
Length
(yd) |
100 |
100 |
Gross
Weight (lb) |
161 |
161 |
Area
(yd2) |
417 |
417 |
Composition |
Polypropylene
Monofilament |
Polypropylene
Monofilament |
Grab
Tensile (lb)
Warp x Fill |
ASTM
D-4632 |
365
x 200 |
370
x 250 |
Elongation
at Break (%)
Warp x Fill |
ASTM
D-4632 |
24
x 7 |
16
x 15 |
Trap
Tear (lb)
Warp x Fill |
ASTM
D-4533 |
100
x 75 |
95
x 55 |
Mullen
Burst (PSI) |
ASTM
D-3786 |
500 |
480 |
Puncture
Strength (lb) |
ASTM
D-4833 |
115 |
135 |
A.O.S.
(Sieve) |
ASTM
D-4751 |
40 |
70 |
Permittivity
(sec-1) |
ASTM
D-4491 |
1.37 |
0.247 |
Coefficient
of Permeability (cm/sec) |
ASTM
D-4491 |
0.092 |
0.01 |
Water
Flow Rate (GPM) |
ASTM
D-4491 |
100 |
18 |
UV
Resistance (%) |
ASTM
D-4355 |
70 |
70 |
70%
(hr) |
ASTM
D-4632 |
1200 |
1200 |
AASHTO-M-288-NTPEP
Tested |
- |
- |
Color |
Black |
Black |
|
|
|
|
Phone: 617-965-0007 |
Fax: 617-965-0097 |
Toll Free: 1-800-770-BOOM |
Email: sales@boomenviro.com |
|
|
Factory Location: |
1 Coffin Avenue |
New Bedford, MA 02746 |
|
BOOM Environmental Products® is
a registered trademark of Geotechnical Supply, Inc. |
|
|
|
 |
|
|